Larson Bar Clamp Mount for Permanent Mount and Magnetic Mount Spotlights - BC-1 - 7/8" - 1.75" Diameter Larson Products Home Page Remote-Enables remote selection of: (7)

Remote-Enables remote selection of: (7) - Horn (4) - Two tone - alternating (3) - Yelp - rapid siren (1) - Wail - manual siren ÂÂ

1800rpm Withstands 65Mph Winds at Full Extension Noise Level: Db level 63 @ 23 ft 120V Auxiliary Power: 20A NEMA 5-20R Type Duplex Receptacle 240V Auxiliary Power: 30A NEMA L6-30R Type Twist Lock Receptacles Fuel: 30 Gallon Polyethylene Fuel tank w/ 3 1/2" fill port Run Time:45 Hours on a Single Tank of Fuel Boom Height: Up to 30 Feet Coverage: 4 to 6 Acres Toll Free: 1-800-369-6671 Mounting: Towable Trailer

industrial machines

This unit includes 6` SOOW cable on the input side terminated in a 5-15 6-20 explosion proof plug and 100` of SOOW cable with blunt cut end on the output side

the LED light will run for another 240 minutes after the battery capacity is too low to run the HID light

Larson Bar Clamp Mount for Permanent Mount and Magnetic Mount Spotlights - BC-1 - 7/8" - 1.75" Diameter Larson Products Home Page Remote-Enables remote selection of: (7)Made in the USA Heavy duty aluminum bar clamping system that enables owners of vehicles, heavy equipment and boats to mount lights or other equipment to square or round tubes, bars or rails. The adjustable clamping system cinches to size around rails of different diameters and can handle payloads to 40 pounds under extreme vibration. for a Step by Step Process on the Installation of the BC 1 Mount The bar clamp mount is made from aluminum and is