PVC Tapping Saddles Size:80MM X 50MM PVC TAPPING SADDLE ISO 4064 Class B compliance

ISO 4064 Class B compliance standard (check local standards)

Non-strippable drive mechanism is protected from damage if turned in the opposite direction of travel

It makes joining poly pipe so simple - all you need is a hacksaw

Nozzle range: #25 to #73

The Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level

PVC Tapping Saddles Size:80MM X 50MM PVC TAPPING SADDLE ISO 4064 Class B compliancePVC Tapping Saddles for use with large diameter PVC or Galvanised pipe to form a 'T' junction. The saddle is placed around the pipe and then bolted together, a hole is then drilled through the opening in the saddle and a BSP threaded fitting is attached to the saddle.