Conquest 1-1/4" x 10' A307 Coarse Threaded Rod - Hot Dip Galvanized CBS/CBSQ Column Bases Fastener Requirements: Use stainless steel

Fastener Requirements: Use stainless steel Simpson Strong-Tie Strong-Drive SD Connector screws or stainless steel nails to prevent galvanic corrosion

Inverted upper threads clear away excess material for a flush fit

This anchor requires a 7/8" hole that is 6" deep

These can be used for wet or dry applications and are compatible with angle grinders

(6) SDWS22312DBB Structural Wood Screws

Conquest 1-1/4" x 10' A307 Coarse Threaded Rod - Hot Dip Galvanized CBS/CBSQ Column Bases Fastener Requirements: Use stainless steelWhen pairing a nut with threaded rod, the material and finish must match. If these do not match, the nut will not fit the threaded rod. Conquest A307 Threaded Rod with a hot dip galvanized finish offers functional performance for tension, anchoring, and bracing applications in construction. Manufactured to ASTM A307 standards, these carbon steel rods are fully threaded for easy cutting, joining, and fastening over their entire length. The hot dip