Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls or dry contact closure to

or dry contact closure to ground) for cycle

This photosensor may also be compatible with some legacy Wintriss products

self-powered

and Z directions Degree of protection IEC 60529 IP67

The ShopFloorConnect Machine Interface (SMI 2) is the fastest way to connect virtually any machine to the ShopFloorConnect Machine Monitoring Software

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls or dry contact closure toWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,