Amana 51580 Bullnose Router Bit 31030 1-1/2" Chisel

1-1/2" Chisel

It's part of Makita's expanding 18V LXT System

No-load RPM: 16

Levels 59" and longer have a bridge over the horizontal vial for uninterrupted scribing and increased frame strength

Bevels -3 to 48 degrees for increased cut capacity

Amana 51580 Bullnose Router Bit 31030 1-1/2" ChiselProfiling Router Bits: Bullnose Router Bits, Convex Edging, Carbide Tipped: 23 32" Rad x 13 16" Dia x 1 1 4" x 1 4" Shank Cuts a shallow arc the fingernail shape rather than a full 180 degree roundover. Like the bullnose radius bit, it has short flats above and below the cutter arc, which produce fillets on stock thicker than 7 8". Must be used with an edge guide on handheld routers, or the fence on a router table. Standard Equipment: 51580 Bullnose