1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns Available Finishes: Choose between mechanically

Available Finishes: Choose between mechanically galvanized (N2000®) for corrosion protection or black phosphate for dry

the Daggerz Self‑Drilling Cement Board Screw with Dagger‑Guard coating offers fast install

) gap is allowed between the end of the header and the face of the jamb stud

the GT Tie delivers both strength and symmetry

162" x 2 1/2" nails into the header and 0

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns Available Finishes: Choose between mechanicallyWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".