10-Hole 2-Way Channel Wing Connector - Electro-Galvanized FRFP/URFP Retrofit Foundation Plates High Load Capacity: Achieves allowable

High Load Capacity: Achieves allowable loads up to 7

The closed top EPDM FIX-A-FLASH RoofjackSQ was designed for an over-sized hole with a smaller diameter pipe where a standard Roofjack will not fit

Simpson truss-head screws are an all purpose screw used to fasten materials to wood or wood-substitute materials

Listed below are the approximate amounts of grout required to install one six-pack of SP58-58S asphalt anchors

Joist nails should be driven at an angle through the joist or truss into the header to maximize load capacity

10-Hole 2-Way Channel Wing Connector - Electro-Galvanized FRFP/URFP Retrofit Foundation Plates High Load Capacity: Achieves allowable10 Hole 2 Way Channel Wing Connector Electro Galvanized allows channels to be connected perpendicularly and can be used to create joints along a vertical piece of strut. 8 Hole 2 Way Wing Fittings allow for 2 arms to be created from the T shaped wing fitting. These Wing Fittings have 9 16" punched holes and should be used with like metals. Electro Galvanized Steel should be used in interior applications where conditions are dry, and humidity is low.