Porsche Brake Hard Line - Master Cylinder to Center Tunnel Angle Coupler - 911 77-83 JWST-911-355-607-03 RB164-21 11 and M28

11 and M28

depends fundamentally on the diameter of the crankshaft bearings and the friction in the bearings

Total length: 164 mm

Porsche Targa frame locking bolt for 911 (1974-1989) and C2/C4 (1989-1994) models

Porsche Fuel injector for 930 (1976-1983)

Porsche Brake Hard Line - Master Cylinder to Center Tunnel Angle Coupler - 911 77-83 JWST-911-355-607-03 RB164-21 11 and M28Porsche This brake line goes from the master cylinder into the smuggler's box and connects to the elbow (which then leads to the back of the car). Power assisted 911 only. Can be used to remove the rear brake regulator on '84 '89 Carrera when installing aftermarket brakes. Avoids extra fittings and couplers by backdating to a single line. Direct replacement for '77 '83 factory line. This is for cars with the power booster and the master cylinder