3/4" Simpson MCR07512 Rebar Cutter Finish Nails Equipment supports in corrosive environments

Equipment supports in corrosive environments

The black phosphate coating is traditional in drywall screws and is designed for use in dry interior environments only

Square Single Channel 2-Hole Post Base - 304 Stainless Steel is a post base designed to fasten Strut Channel to the floor

Long Slotted Design: Allows for the most flexibility in installation and adjustment

Suited for board-to-steel applications with steel up to approximately 0

3/4" Simpson MCR07512 Rebar Cutter Finish Nails Equipment supports in corrosive environmentsWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".