Bulk 1/4"-10 × 3⁄4″ Phillips Pan Head 48-2 Thread-Forming Screws for Thermoplastics – Black-Oxide Steel, Wax-Lubed FHCS Stainless 24 mm (Thread-Forming) Available Lengths

24 mm (Thread-Forming) Available Lengths Fully threaded — select length above Head / Drive Pan Head / T25 Torx® (6-lobe) Thread Form 30° self-forming thread-forming profile (for thermoplastics) Material Carbon Steel Finish Zinc & Bake (RoHS) System of Measurement Metric Standards / Reference Thread-forming screw design reference (non-OEM) More Monster Bolts

Equip your toolkit with our M20 x 2

these locknuts resist loosening under vibration and distribute load evenly across the surface

not just the surface

Bulk US / Inch Steel Fender Washers – Hot Dipped Galvanized (HDG) Wide Diameter Washers

Bulk 1/4"-10 × 3⁄4″ Phillips Pan Head 48-2 Thread-Forming Screws for Thermoplastics – Black-Oxide Steel, Wax-Lubed FHCS Stainless 24 mm (Thread-Forming) Available LengthsMonster Overview: Fasten thick plastic panels with bulk 1 4 10 34 Phillips Pan Head 48 2 Thread Forming Screws from Monster Bolts. Their tri lobular Plastite flank plastically flows thermoplastic, forming tough, chip free internal threadsno tapping, no cleanup. Each screw is heat treated carbon steel, finished in a deep black oxide conversion coating for low glare corrosion protection, then factory wax lubed for consistently low seating torque. Master