Distance-Settable Reflective Sensor - Visible Light, 20 to 80 mm Sensing Distance - For detecting parts near a background Controls NOTE: When replacing a Balluff

NOTE: When replacing a Balluff Linear sensor

This key fits SmartPAC 2 with a date code (serial number) 1237XXXX or lower

The current method of simultaneously pressing hard on two spring loaded mechanical buttons in order to initiate the cycle of a machine has been shown to cause a serious wrist injury commonly known as Carpal Tunnel Syndrome

The SMI-2 machine monitoring interface is available in an enclosure for stand-alone mounting

HD19 Cable

Distance-Settable Reflective Sensor - Visible Light, 20 to 80 mm Sensing Distance - For detecting parts near a background Controls NOTE: When replacing a BalluffThe Distance Settable Reflective Photosensor is useful for detecting objects near a background, without detecting the background itself. The sensing distance is adjustable from a minimum of 20mm to a maximum of 80mm. The emitter light source is a red LED, which provides a visible aiming spot to aid in installation. Its a reflective sensor the emitter and receiver are in the same housing, aimed in the same direction, but angled slightly toward the